Xerox 5000 manual Profiles

3. Profiles

•The output print in the output area is curled upwards and was measured with a curl average of 10 mm (refer to Evaluate your print output for paper curl).

•Using the 1-Sided Face Up row, as shown below, enter the known values into the table.

•Average curl is 10 mm upward and average toner area coverage is 5%. Therefore, select Upward and enter 5% for the 10 mm column.

•Enter any higher number for the 6 mm (such as 6%) and the 2 mm (such as 7%).

•The printer will induce a 10 mm curl in the downward direction for the 5% toner area coverage sheets in your job.

TIP: When creating/editing a Decurler Profile, you must enter a percentage value for 3-6 cells of the Downward and/or Upward tables.

NOTE: The default value for each cell of the table is 100%.

Continue to the Decurler Profile procedure on page 3-42.

DocuColor 5000 Administrator Guide 3-41