SETUP Menu
SETUP MENU
Front: LARGE
Rear: SMALL
RSX-965 Specifications
Audio
Center: LARGE
Subwoofer: YES
Dynamic Range: OFF
Menu Display: SCREEN
Screen Color: BLUE
The SETUP menu provides status information and configuration options for a variety of system parameters. Some of these settings
Amplifier Power
Frequency Response:
Signal to Noise Ratio (IHF “A”):
(Dolby Digital)
75 watts per channel into 8 ohms x 5 chan. all channels driven, from 20 Hz to 20k Hz,
< 0.05 THD
100 w/ch, 8 ohms, 1kHz, 1% THD, DIN
5 Hz - 20 kHz, + 0.5 dB
92 dB (Stereo), 70 dB
duplicate the function of front panel controls.
Note: See the discussion of speaker configuration under the SPEAKER MODE button heading in the Front Panel Controls sec- tion of the manual. Detailed instructions for choosing speaker types are presented there.
FRONT: whether the front speakers are LARGE (full bass re- sponse) or SMALL (limited bass output)
REAR: whether the rear speakers are LARGE, SMALL, or NONE
CENTER: whether the center speaker is LARGE, SMALL, or NONE
SUBWOOFER: whether there is a subwoofer in the system: YES or
NO
DYNAMIC RANGE: whether the dynamic range compression is turned OFF (full dynamic range/no compression), MID (moderate dynamic range/moderate compresson), or MIN (minimum dynamic range/maximum compression)
MENU DISPLAY: determines whether status information will ap- pear on screen when volume, input, or other selections are made
– choices are SCREEN (display on) or OFF (display off).
SCREEN COLOR: selects a background color for the on screen dis- play.
Change any setting by moving the cursor to the desired line using the UP/DOWN buttons on the remote or the NUMERIC Keypad front panel buttons (
), change the setting by pressing the EN- TER button to step through the choices. Return to the MAIN menu by pressing the BACK button. Cancel the
Input Impedance: | 47 k Ohms |
Output Impedance: | 500 ohms |
Total Harmonic Distortion: | 0.05 % (@1 kHz) |
Intermodulation Distortion: | 0.03 % (400 Hz/7 kHz, 4:1) |
Output |
|
Maximum: | > 6 volts |
Dolby, 200 mV in: | 1.1 volt |
Video
Frequency Response: | 3 |
Signal to Noise Ratio: | 45 dB |
Input Impedance: | 75 ohms |
Output Impedance: | 75 ohms |
Output level (peak to peak): | 1 volt |
General
Power Consumption: | 400 watts |
Power Requirements (AC): | 115 volts 50/60 Hz or |
| 230 volts 50/60 Hz |
Weight: | 15 Kg/33 lb. |
Dimensions (W x H x D): | 450 x 158 x 400 mm |
| 173/4" x 61/4" x 153/4" |
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.
DTS is a registered trademark of Digital Theater Systems.
Dolby Pro Logic and Dolby Digital are registered trademarks of the Dolby Licensing Corporation.
23
