Star Micronics LC-15 user manual Command Summary

COMMAND SUMMARY

MODE CONTROL CODE		FUNCTION	PAGE
	<BEL>	Bell	66
	<BS>	Backspace	55
	<HT>	Horizontal tab	57
	<LF>	Line feed	48
	<VT>	Vertical tab	53
	<FF>	Form feed	51
	<CR>	Carnage return	54
	<so>	Expanded printing for one line	43
	<S1>	Condensed printing	42
Std.	<DCI>	Sel primer on-line	66
	<DC2>	Cancel condensed printing
IBM	<DC2>	Pica pitch	:?
Std.	<DC3>	Set printer off-line	66
	<DC4>	Cancel one-line expanded printing	43
	<CAN>	Catrcd last line	65
	<ESC> <LF>	Reverse line feed	48
	<ESC> <FF>	Return to top of current page	51
	<ESC><so>	Expanded printing for one line	43
	<ESC> <Sb	Condensed printing	42
	<ESC> <EM> d>	Mantraf feed	67
	<ESC> <EM> <4>	Auto feed	68
	<ESC> <EM> “R”	Eject paper from ASF	68
	<ESC> <EM> “T” n	SWprint stars position on ASF	68
Std.<ESC> <SP> n		Increase character spacing
	<ESC> “!” n	Select master print mode	::
	<ESC> “#”	Acc t MSB as is	65
	<ESC> “$” nl n2	AbsoT ute horizontal tab in iches	57
	<ESC> “90” <O>	Select ROM character set
	<ESC> “%” <1>	Selectdowrdoad character set	%
	<ESC> “70” “0”	Select ROM character set	63
	<ESC> “yO” “1”	Select dowrdoadcharacterset	62
	<ESC> “&” <0> nl n2 mo ml d	m3 ,mll
		Definedraftdownload character	60
	<ESC> “&” <O>nl n2 mo ml m2 m3 ,. .m46
	<ESC>“*”nOnln2ml d . . .	DefineNLQdownloadcharacter	61
		Select graphics mode	59
	<Esc>“+”<1>	Execute macro instruction
	<ESC> “+” ... <RS>	Define macro instruction	::
	<Esc>“-”<b	Stoptrrrdedining	38
	<ESC>“-” <1>	Start tstrdcrlining
	<ESC> “-” “O”	Stop underlining	::
	<ESC> “-” “l”	Start underlining	37
	<ESC> “r’ nO	Select vertical tab channel	52
	<ESC> “O”	Set line spacing to 1/8 inch	47
	<ESC> “l”	Set line spacing to 7f12 incb	47
Std.	<ESC> “2”	Set line spacirrgto 1/6 inch	47
IBM <ESC> “2”		Execute <ESC> “A”	48
	<ESC> “3” n	Set line spacing to nf216 inch	47
Std.	<ESC> “4”	Select italic characters	36
IBM	<Esc>“4”	Set topof pageat current position	49
Std.<ESC> “5”		Select upright characters	36

114