Cisco Systems OL-7469-04 appendix Flash Error Messages

Appendix B Troubleshooting

MWAM System Error Messages

Error Message %MWAM_FILESYSTEM-3-FC_INVALID_DIR_REQ: Cannot read or write complete %s file system.

Explanation A CLI command attempted to copy or overwrite the full file system.

Recommended Action Copy from or to an individual file.

Error Message %MWAM_FILESYSTEM-3-FC_DIR_IS_FULL: Cannot add %s to file system, directory is full.

Explanation The file system directory holds a limited number of entries, and an attempt was made to add a new file when the directory was already full. This can happen even when the file system still contains free space.

Recommended Action Delete an existing file or FORMAT the file system.

Error Message %MWAM_FILESYSTEM-6-BOOTFLASH_BUSY: Cannot access bootflash, filesystem is busy

Explanation The MWAM bootflash does not support reading and writing at the same time. The message means that bootflash is being accessed by some other operation, like copy, dir, format or squeeze.

Recommended Action Try the bootflash operation again after other operations have completed.

Flash Error Messages

Error Message %MWAM_FLASH-3-ERR: "%s"

Explanation An error occurred while programming/erasing the BootFlash

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter “OUTPUT_INTERPRETER.” Also perform a search of the Bug Toolkit “BUG_TOOLKIT.” If you still require assistance, open a case with the Technical Assistance Center via the Internet “TAC_CASE_OPEN,” or contact your Cisco technical support representative and provide the representative with the gathered information.

Error Message %MWAM_FLASH-3-OTHER_CPU_RELOAD: "%s"

Explanation The other CPU within this complex is reloading, flash programming operation can not proceed.

Recommended Action Wait for the system to complete the reload operation.

Multiprocessor WAN Application Module User Guide

OL-7469-04 B-7