Once a programme has started
- changing the programme
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
You will need to cancel the current
programme before you can select a
new one.
- cancelling the programme and then
selecting a different programme
^Press the Start/Stop button.
The items will be cooled down,
depending on the temperature
reached and how long they have
been dried for.
If you press the Start/Stop button
again during the cooling down
phase, Finish will light up in the
display.
^Press the Door button.
^Close the door.
^Select another programme and start
it.
- cancelling the programme and then
removing the laundry
^Proceed as described in "Adding or
removing laundry after a programme
has started" below.
^Switch the dryer off after closing the
door.
Altering Delay start
^See "Delay start".
Adding or removing laundry
after a programme has started
^Press the Door button.
^Open the door.
,Danger of burning:
Do not touch the back of the drum
when adding or removing items. The
drum and the items can get very hot.
^Add or remove items as required.
^Close the door.
^Press the Start/Stop button.
Time remaining
The time left shown in the display may
now vary from the actual drying time.
Changing the programme sequence24