Altering the volume of thebuzzer
The buzzer has two volumes.
Follow the steps (A,B,C...) to
programme and store in memory.
Before you begin, ensure that:
–The tumble dryer is switched off.
–The door is closed.
APress the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
BSwitch the dryer on.
Wait until the Start/Stop button lights up
constantly ...
C. . . and then release the Start/Stop
button.
DPress the Low temperature button
three times.
– The Low temperature indicator light
will flash four times briefly.
Anumber to show which option is
selected will appear in the display
alternating with the letter P.
0Normal buzzer
(factory default setting)
ILoud buzzer
(the Automatic plus indicator light will
also flash)
EPressing the Start/Stop button
switches between the options.
FSwitch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^Carry out steps Ato D.
^Switch the dryer off after step D.
Programmable functions
53