Altering the residual moisturelevel in the Minimum iron
programme
The tumble dryer is designed to dry
effectively using as little energy as
possible.
However, if you require the laundry to
be drier or damper, you can reduce
or increase the default residual
moisture in the Minimum iron
programme.
Follow the steps (A,B,C...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
APress the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
BSwitch the dryer on.
Wait until the Start/Stop button lights up
constantly ...
C. . . and then release the Start/Stop
button.
DPress the Low temperature button
once.
–The Low temperature indicator light
will flash twice briefly.
Anumber to show which option is
selected will appear in the display
alternating with the letter P.
0Increased residual moisture.
Laundry damper.
IStandard residual moisture
(factory default setting)
(the Automatic plus indicator light will
also flash once).
2Reduced residual moisture.
Laundry drier.
(the Automatic plus indicator light will
also flash twice).
EPressing the Start/Stop button
switches between the options.
FSwitch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^Carry out steps Ato D.
^Switch the dryer off after step D.
Programmable functions
51