User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
9-22 Security Commands
202-10088-01, March 2005
Access Retransmission The number of RADIUS Access-Request packets retransmitted
to this RADIUS authentication server.
Access Accepts The number of RADIUS Access-Accept packets, including both valid and
invalid packets, which were received from this server.
Access Rejects The number of RADIUS Access-Reject packets, including both valid and
invalid packets, which were received from this server.
Access Challenges The number of RADIUS Access-Challenge packets, including both valid and
invalid packets, which were received from this server.
Malformed Access Responses The number of malformed RADIUS Access-Response packets
received from this server. Malformed packets include packets with an invalid
length. Bad authenticators or signature attributes or unknown types are not
included as malformed access responses.
Bad Authenticators The number of RADIUS Access-Response packets containing invalid authenti-
cators or signature attributes received from this server.
Pending Requests The number of RADIUS Access-Request packets destined for this server that
have not yet timed out or received a response.
Timeouts The number of authentication timeouts to this server.
Unknown Types The number of RADIUS packets of unknown types, which were received from
this server on the authentication port.
Packets Dropped The number of RADIUS packets received from this server on the authentication
port and dropped for some other reason.
Secure Shell (SSH) Commands
This section provides a detailed explanation of the SSH commands. The commands are divided
into the following groups:
• Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
• Show commands are used to display switch settings, statistics and other information.

ip ssh

This command is used to enable SSH.
Default disabled
Format ip ssh