NETGEAR 7300S Provisioning Ieee 802.1p Commands, Clear ip dhcp binding, Clear ip dhcp conflict

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

clear ip dhcp binding

This command deletes an automatic address binding from the DHCP server database. If “*” is specified, the bindings corresponding to all the addresses are deleted. <address> is a valid IP address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.

Default	none
Format	clear ip dhcp binding {address *}
Mode	Privileged EXEC

clear ip dhcp server statistics

This command clears DHCP server statistics counters.

Format	clear ip dhcp server statistics
Mode	Privileged EXEC

clear ip dhcp conflict

The command is used to clear an address conflict from the DHCP Server database. The server detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is used as the address parameter.

Default	none
Format	clear ip dhcp conflict {<address> *}
Mode	Privileged EXEC

Provisioning (IEEE 802.1p) Commands

This chapter provides a detailed explanation of the Provisioning commands. The commands are divided into two functional groups:

•Show commands display switch settings, statistics, and other information.

•Configuration commands configure features and options of the switch. For every configuration command, there is a show command that displays the configuration setting.

8-94 Switching Commands

202-10088-01, March 2005