NETGEAR 7300S Show logging buffered, Show logging hosts, Admin Status, Severity Level Filter

202-10088-01, March 2005

IP Address of the configured server.

Address Type of Server.

The minimum severity to log to the specified address.

Server Port Number.This is the port on the local host from which syslog messages are sent.

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Log Messages: The number of messages received by the log process. This includes messages that are dropped or ignored

show logging buffered

This command displays buffered logging (system startup and system operation logs).

Format	show logging buffered
Mode	Privileged EXEC
Admin Status	The current state of the in-memory log.
Severity Level Filter	The minimum severity to log to the in memory log. Messages
	with an equal or lower numerical severity are logged.
Component Filter	The component(s) from which received messages are to be
	logged to the in memory log. Either a single component id or "all
	components" may be specified.

Wrapping Behavior The behavior of the In Memory log when faced with a log full situation.

Log CountThe count of valid entries in the buffered log.

Log Messages: The number of messages forwarded by the syslog function to a syslog host. Messages forwarded to multiple hosts are counted once for each host.

show logging hosts

This command displays all configured logging hosts.

Format	show logging hosts
Mode	Privileged EXEC

Host Index (used for deleting)

Host IP Address

Address Type

Severity Level

Port

Switching Commands 8-71