NETGEAR 7300S manual Quick Start up Downloading from Tftp Server, Quick Start up Factory Defaults

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Quick Start up Downloading from Out-of-Band PC to Switch (Only XMODEM)

Table 6-7.	Quick Start up Downloading from Out-of-Band PC to Switch (Only XMODEM)
Command		Details
copy <url> {nvram:startup-config		Sets the download datatype to be an image or
system:image}		config file.
		The URL must be specified as:
		xmodem:filepath/fileName
		For example:
		If the user is using HyperTerminal, the user
		must specify which file is to be sent to the
		switch.
		The Switch will restart automatically once the
		code has been downloaded.

Quick Start up Downloading from TFTP Server

Before starting a TFTP server download, the operator must complete the Quick Start up for the IP Address.

Table 6-8.	Quick Start up Downloading from TFTP Server
Command		Details
copy <url> {nvram:startup-config		Sets the download datatype to be an image
system:image}		or config file.
		The URL must be specified as:
		tftp://ipAddr/filepath/fileName.
		The nvram:startup-config option downloads
		the config file using tftp and system:image
		option downloads the code file.

Quick Start up Factory Defaults

Table 6-9. Quick Start up Factory Defaults

Command

clear config

Details

Enter yes when the prompt pops up to clear all the configurations made to the switch.

6-6 Quick Start up

202-10088-01, March 2005