NETGEAR 7300S manual Lease, Network, No ip dhcp pool, No lease

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Format	ip dhcp pool <name>
Mode	Global Config Mode

no ip dhcp pool

This command removes the DHCP address pool. The name should be previously configured pool name.

Format	no ip dhcp pool <name>
Mode	Global Config Mode

lease

This command configures the duration of the lease for an IP address that is assigned from a DHCP server to a DHCP client. The overall lease time should be between 1-86400 minutes. If infinite is specified, lease is set for 60 days. Days is an integer from 0 to 59. Hours is an integer from 0 to 1439. Minutes is an integer from 0 to 86399.

Default	1 (day)
Format	lease {[<days> [hours] [minutes]] [infinite]}
Mode	DHCP Pool Config
no lease

This command restores the default value of the lease time for DHCP Server.

Format	no lease
Mode	DHCP Pool Config

network

This command is used to configure the subnet number and mask for a DHCP address pool on the server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to

255.IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool. The prefix-length is an integer from 0 to 32.

Default	none
Format	network <networknumber> [mask prefixlength]
Mode	DHCP Pool Config
8-86	Switching Commands

202-10088-01, March 2005