NETGEAR 7300S manual Match any, Match class-map

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

match any

This command adds to the specified class definition a match condition whereby all packets are considered to belong to the class. The optional [not] parameter has the effect of negating this match condition for the class (i.e., none of the packets are considered to belong to the class).

Default	none
Format	match [not] any
Mode	Class-Map Config
match class-map

This command adds to the specified class definition the set of match conditions defined for another class. The <refclassname> is the name of an existing DiffServ class whose match conditions are being referenced by the specified class definition.

Note: there is no [not] option for this match command.

Default	none
Format	match class-map <refclassname>
Mode	Class-Map Config
Restrictions	The class types of both <classname> and <refclassname> must
	be identical (i.e., any vs. any, or all vs. all). A class type of acl is
	not supported by this command.
	Cannot specify <refclassname> the same as <classname> (i.e.,
	self-referencing of class name not allowed).
	At most one other class may be referenced by a class.
	Any attempt to delete the <refclassname> class while still refer-
	enced by any <classname> shall fail.
	The combined match criteria of <classname> and <refclass-
	name> must be an allowed combination based on the class type.
	Any subsequent changes to the <refclassname> class match cri-
	teria must maintain this validity, or the change attempt shall fail.
	The total number of class rules formed by the complete reference
	class chain (includes both predecessor and successor classes)
	must not exceed a platform-specific maximum.
	In some cases, each removal of a refclass rule reduces the maxi-
	mum number of available rules in the class definition by one.
11-12	Quality of Service (QoS) Commands

202-10088-01, March 2005