NETGEAR 7300S manual Clear dot1x statistics, Clear radius statistics, Dot1x defaultlogin

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Format	authentication login <listname> [method1 [method2
	[method3]]]
Mode	Global Config
no authentication login

This command deletes the specified authentication login list. The attempt to delete will fail if any of the following conditions are true:

•The login list name is invalid or does not match an existing authentication login list

•The specified authentication login list is assigned to any user or to the non configured user for any component

•The login list is the default login list included with the default configuration and was not created using ‘authentication login’. The default login list cannot be deleted.

Format	no authentication login <listname>
Mode	Global Config

clear dot1x statistics

This command resets the 802.1x statistics for the specified port or for all ports.

Format	clear dot1x statistics { <slot/port> all }
Mode	Privileged EXEC

clear radius statistics

This command is used to clear all RADIUS statistics.

Format	clear radius statistics
Mode	Privileged EXEC

dot1x defaultlogin

This command assigns the authentication login list to use for non-configured users for 802.1x port security. This setting is over-ridden by the authentication login list assigned to a specific user if the user is configured locally. If this value is not configured, users will be authenticated using local authentication only.

9-6 Security Commands

202-10088-01, March 2005