NETGEAR 7300S Show spanning-tree mst port summary, Show spanning-tree mst summary, CST Port Cost

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Point To Point MAC Status Derived value indicating if this port is part of a point to point link.

CST Regional Root	The regional root identifier in use for this port.
CST Port Cost	The configured path cost for this port.

show spanning-tree mst port summary

This command displays the settings of one or all ports within the specified multiple spanning tree instance. The parameter <mstid> indicates a particular MST instance. The parameter {<slot/port> all} indicates the desired switch port or all ports.

If 0 (defined as the default CIST ID) is passed as the <mstid>, then the status summary is displayed for one or all ports within the common and internal spanning tree.

Format	show spanning-tree mst port summary <mstid> {<slot/
	port> all}
Mode	Privileged EXEC and User EXEC
MST Instance ID	The MST instance associated with this port.
Slot/Port	Valid slot and port number separated by forward slashes.
Type	Currently not used.
STP State	The forwarding state of the port in the specified spanning tree
	instance
Port Role	The role of the specified port within the spanning tree.
Link Status	The operational status of the link. Possible values are “Up” or
	“Down”.
Link Trap	The link trap configuration for the specified interface.

show spanning-tree mst summary

This command displays summary information about all multiple spanning tree instances in the switch. On execution, the following details are displayed.

Format	show spanning-tree mst summary
Mode	Privileged EXEC and User EXEC

MST Instance ID List List of multiple spanning trees IDs currently configured.

For each MSTID:

Switching Commands 8-131

202-10088-01, March 2005