User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-36 Switching Commands
202-10088-01, March 2005
Management VLAN Command
This command is used to set the Management VLAN.

network mgmt_vlan

This command configures the Management VLAN ID.
Default 1
Format network mgmt_vlan <1-4094>
Mode Privileged EXEC
System Configuration Commands
This chapter provides a detailed explanation of the System configuration commands. The
commands are divided into two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.

addport

This command adds one port to the port-channel (LAG). The first interface is a
logical slot and port number of a configured port-channel.
Note: Before adding a port to a port-channel, set the physical mode of the port. See ‘speed’
command.
Format addport <logical slot/port>
Mode Interface Config

auto-negotiate

This command enables automatic negotiation on a port. The default value is enable.
Format auto-negotiate