NETGEAR 7300S manual Show sntp client, Show sntp server

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Multicast Count	Current number of unsolicited multicast messages that have been
	received and processed by the SNTP client since last
	reboot

show sntp client

This command is used to display SNTP client settings.

Format	show sntp client
Mode	Privileged Exec

Client Supported Modes Supported SNTP Modes (Broadcast, Unicast, or Multicast).

SNTP Version	The highest SNTP version the client supports
Port	SNTP Client Port
Client Mode:	Configured SNTP Client Mode
Poll Interval	Poll interval value for SNTP clients in seconds as a power of two.
Poll Timeout	Poll timeout value in seconds for SNTP clients.
Poll Retry	Poll retry value for SNTP clients.

show sntp server

This command is used to display SNTP server settings and configured servers.

Format	show sntp server
Mode	Privileged Exec
Server IP Address	IP Address of configured SNTP Server
Server Type	Address Type of Server.
Server Stratum	Claimed stratum of the server for the last received valid packet.
Server Reference ID	Reference clock identifier of the server for the last received valid
	packet.
Server Mode	SNTP Server mode.
Server Max Entries	Total number of SNTP Servers allowed.
Server Current Entries	Total number of SNTP configured.
For each configured server:
IP Address	IP Address of configured SNTP Server.
8-76	Switching Commands

202-10088-01, March 2005