User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
9-4 Security Commands
202-10088-01, March 2005
show port-security
This command displays the port-security settings for the entire system.
Format show port-security
Mode Privileged EXEC
Admin Mode Port Locking mode for the entire system
show port-security
This command displays the port-security settings for a particular interface or all interfaces.
Format show port-security <interface | all>
Mode Privileged EXEC
Interface Admin Mode Port Locking mode for the Interface.
Dynamic Limit Maximum dynamically allocated MAC Addresses.
Static Limit Maximum statically allocated MAC Addresses.
Violation Trap Mode Whether violation traps are enabled.
show port-security dynamic
This command displays the dynamically locked MAC addresses for port.
Format show port-security dynamic <interface>
Mode Privileged EXEC
MAC Address MAC Address of dynamically locked MAC.
show port-security static
This command displays the statically locked MAC addresses for port.
Format show port-security static <interface>
Mode Privileged EXEC
MAC Address MAC Address of statically locked MAC.