NETGEAR 7300S manual Garp Commands, Set garp timer join, No set garp timer join

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Default	0
Format	vlan priority <priority>
Mode	Interface Config

GARP Commands

This chapter provides a detailed explanation of the GARP commands. The commands are divided into two functional groups:

•Show commands display switch settings, statistics, and other information.

•Configuration commands configure features and options of the switch. For every configuration command, there is a show command that displays the configuration setting.

set garp timer join

This command sets the GVRP join time per port and per GARP. Join time is the interval between the transmission of GARP Protocol Data Units (PDUs) registering (or re-registering) membership for a VLAN or multicast group.

This command has an effect only when GVRP is enabled. The time is from 10 to 100 (centiseconds). the value 20 centiseconds is 0.2 seconds.

Default	20
Format	set garp timer join <10-100>
Mode	Interface Config
no set garp timer join

This command sets the GVRP join time per port and per GARP to 20 centiseconds (0.2 seconds). This command has an effect only when GVRP is enabled.

Format	no set garp timer join
Mode	Interface Config

8-96 Switching Commands

202-10088-01, March 2005