User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Routing Commands 10-23
202-10088-01, March 2005
no enable (RIP)
This command sets the administrative mode of RIP in the router to inactive.
Format no enable
Mode Router RIP Config
ip rip
This command enables RIP on a router interface.
Default disabled
Format ip rip
Mode Interface Config
no ip rip
This command disables RIP on a router interface.
Format no ip rip
Mode Interface Config
auto-summary
This command enables the RIP auto-summarization mode.
Default enabled
Format auto-summary
Mode Router RIP Config
no auto-summary
This command disables the RIP auto-summarization mode.
Format no auto-summary
Mode Router RIP Config
default-information originate (RIP)
This command is used to control the advertisement of default routes.