User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
10-24 Routing Commands
202-10088-01, March 2005
Format default-information originate
Mode Router RIP Config
no default-information originate (RIP)
This command is used to control the advertisement of default routes.
Format no default-information originate
Mode Router RIP Config
default-metric (RIP)
This command is used to set a default for the metric of distributed routes.
Format default-metric <0-15>
Mode Router RIP Config
no default-metric (RIP)
This command is used to reset the default metric of distributed routes to its default value.
Format no default-metric
Mode Router RIP Config
distance rip
This command sets the route preference value of RIP in the router. Lower route preference values
are preferred when determining the best route.
Default 15
Format distance rip <0-255>
Mode Router RIP Config
no distance rip
This command sets the default route preference value of RIP in the router.
Format no distance rip
Mode Router RIP Config