User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-103
202-10088-01, March 2005
set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a selected interface. If an
interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-
channel (LAG), GARP functionality will be disabled on that interface. GARP functionality will
subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed
from an interface that has GARP enabled.
Default disabled
Format set gmrp interfacemode
Mode Interface Config
no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a selected interface. If an
interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-
channel (LAG), GARP functionality will be disabled on that interface. GARP functionality will
subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed
from an interface that has GARP enabled.
Format no set gmrp interfacemode
Mode Interface Config
set gmrp interfacemode all
This command enables GARP Multicast Registration Protocol on all interfaces. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel
(LAG), GARP functionality will be disabled on that interface. GARP functionality will
subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed
from an interface that has GARP enabled.
Default disabled
Format set gmrp interfacemode all
Mode Global Config
no set gmrp interfacemode all
This command disables GARP Multicast Registration Protocol on a selected interface.
Format no set gmrp interfacemode all