User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-69
202-10088-01, March 2005
logging host remove
This command disables logging to host. See ‘show logging hosts’ for a list of host indices.
Format logging host remove <hostindex>
Mode Global Config
logging port
This command sets the local port number of the LOG client for logging messages. The <portid>
can be in the range from 1 to 65535.
Default 514
Format logging port <portid>
Mode Global Config
no logging port
This command resets the local logging port to the defalt.
Format no logging port
Mode Global Config
logging syslog
This command enables syslog logging.
Default disabled; local0
Format logging syslog
Mode Global Config
no logging syslog
This command disables syslog logging.
Format no logging syslog
Mode Global Config