NETGEAR 7300S Remote Authentication Dial In User Service Radius Commands, Radius accounting mode

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Note that the login list associated with the ‘admin’ user can not be changed to prevent accidental lockout from the switch.

Format	users login <user> <listname>
Mode	Global Config

Remote Authentication Dial In User Service (RADIUS) Commands

This section provides a detailed explanation of the RADIUS commands. The commands are divided into the following groups:

•Configuration commands are used to configure features and options of the switch. For every configuration command there is a show command that will display the configuration setting.

•Show commands are used to display switch settings, statistics and other information.

radius accounting mode

This command is used to enable the RADIUS accounting function.

Default	disabled
Format	radius accounting mode
Mode	Global Config

no radius accounting mode

This command is used to set the RADIUS accounting function to the default value - i.e. the RADIUS accounting function is disabled.

Format	no radius accounting mode
Mode	Global Config

radius server host

This command is used to configure the RADIUS authentication and accounting server.

Security Commands 9-17

202-10088-01, March 2005