User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

CST Regional Root Bridge Identifier of the common spanning tree regional root. It is derived using the bridge priority and the base MAC address of the bridge.

Regional Root Path Cost Path cost to the common spanning tree Regional Root. Associated FIDs List of forwarding database identifiers currently associated with this instance.

Associated VLANs List of VLAN IDs currently associated with this instance.

When the “brief” optional parameter is included, this command displays spanning tree settings for the bridge. In this case, the following details are displayed.

Bridge Priority

Specifies the bridge priority for the spanning tree.

Bridge Identifier

The bridge identifier for the selected instance.

Bridge Max Age

Specifies the bridge maximum age for the spanning tree.

Hello Time

Configured value of the parameter for the common spanning tree.

Bridge Forwarding Delay Specifies the time spent in “Listening and Learning” mode before forwarding packets. Bridge Forwarding Delay must be greater or equal to “(Bridge Max Age/2) + 1”. The time range is from 4 seconds to 30 seconds. The default value is 15.

Bridge Hold Time Minimum time between transmission of Configuration Bridge Protocol Data Units (BPDUs).

show spanning-tree interface

This command displays the settings and parameters for a specific switch port within the common and internal spanning tree. The <slot/port> is the desired switch port. The following details are displayed on execution of the command.

Format

show spanning-tree interface <slot/port>

Modes

Privileged EXEC

Port mode

User EXEC

Enabled or disabled.

Port Up Time Since Counters Last Cleared Time since port was reset, displayed in days, hours, minutes, and seconds.

STP BPDUs Transmitted Spanning Tree Protocol Bridge Protocol Data Units sent

STP BPDUs Received Spanning Tree Protocol Bridge Protocol Data Units received. RST BPDUs Transmitted Rapid Spanning Tree Protocol Bridge Protocol Data Units sent RST BPDUs Received Rapid Spanning Tree Protocol Bridge Protocol Data Units received.

8-128

Switching Commands

202-10088-01, March 2005

Page 198
Image 198
NETGEAR 7300S manual Show spanning-tree interface, Port mode