NETGEAR 7300S Default-router, Dns-server, Hardware-address, No default-router, No dns-server

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

default-router

This command specifies the default router list for a DHCP client. {address1, address2… address8} are valid IP addresses, each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.

Default	None
Format	default-router<address1> [<address2>....<address8>]
Mode	DHCP Pool Config
no default-router

This command removes the default router list.

Format	no default-router
Mode	DHCP Pool Config

dns-server

This command specifies the IP servers available to a DHCP client. Address parameters are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.

Default	none
Format	dns-server<address1> [<address2>....<address8>]
Mode	DHCP Pool Config
no dns-server

This command removes the DNS Server list.

Format	no dns-server
Mode	DHCP Pool Config

hardware-address

This command specifies the hardware address of a DHCP client.

Hardware-address is the MAC address of the hardware platform of the client consisting of 6 bytes in dotted hexadecimal format.

Switching Commands 8-83

202-10088-01, March 2005