User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
10-30 Routing Commands
202-10088-01, March 2005
show ip rip interface This command displays information related to a particular RIP interface.
Format show ip rip interface <slot/port>
Mode Privileged EXEC and User EXEC
Interface Valid slot and port number separated by forward slashes. This is a
configured value.
IP Address The IP source address used by the specified RIP interface. This is
a configured value.
Send version The RIP version(s) used when sending updates on the specified
interface. The types are none, RIP-1, RIP-1c, RIP-2. This is a
configured value.
Receive version The RIP version(s) allowed when receiving updates from the
specified interface. The types are none, RIP-1, RIP-2, Both. This
is a configured value.
Both RIP Admin Mode RIP administrative mode of router RIP operation; enable acti-
vates, disable de-activates it. This is a configured value.
Link State Indicates whether the RIP interface is up or down. This is a con-
figured value.
Authentication Type The RIP Authentication Type for the specified interface. The
types are none, simple, and encrypt. This is a configured value.
Default Metric A number which represents the metric used for default routes in
RIP updates originated on the specified interface. This is a con-
figured value.
The following information will be invalid if the link state is down.
Bad Packets Received The number of RIP response packets received by the RIP process
which were subsequently discarded for any reason.
Bad Routes Received The number of routes contained in valid RIP packets that were
ignored for any reason.
Updates Sent The number of triggered RIP updates actually sent on this inter-
face.