User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-74 Switching Commands
202-10088-01, March 2005
sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value from 1-30.
Default 5
Format sntp unicast client poll-timeout <poll-timeout>
Mode Global Config
no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
Format no sntp unicast client poll-timeout
Mode Global Config
sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
Default 1
Format sntp unicast client poll-retry <poll-retry>
Mode Global Config
no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value.
Format no sntp unicast client poll-retry
Mode Global Config
sntp multicast client poll-interval
This command will set the poll interval for SNTP multicast clients in seconds as a power of two
where <poll-interval> can be a value from 6 to 16.
Default 6
Format sntp multicast client poll-interval <poll-interval>
Mode Global Config