NETGEAR 7300S Sent Octets/Packets, Show service-policy, Dir, Offered Packets, Discarded Packets

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Sent Octets/Packets	A count of the octets/packets forwarded for this class instance
	after the defined DiffServ treatment was applied. In this case, for-
	warding means the traffic stream was passed to the next func-
	tional element in the data path, such as the switching or routing
	function or an outbound link transmission element. Only dis-
	played for the 'out' direction.
Note:	None of the counters listed here are guaranteed to be supported on all
	platforms. Only supported counters are shown in the display output.
show service-policy

This command displays a summary of policy-oriented statistics information for all interfaces in the specified direction. The direction parameter indicates the interface direction of interest.

This command enables or disables the route reflector client. A route reflector client relies on a route reflector to re-advertise its routes to the entire AS. The possible values for this field are

enable and disable.

Format	show service-policy <in out>
Mode	Privileged EXEC

The following information is repeated for each interface and direction (only those interfaces configured with an attached policy are shown):

Interface	Valid slot and port number separated by forward slashes.
Dir	The traffic direction of this interface service, either in or out.
Operational Status	The current operational status of this DiffServ service interface.
Offered Packets	A count of the total number of packets offered to all class
	instances in this service before their defined DiffServ treatment is
	applied. These are overall per-interface per-direction counts.
Discarded Packets	A count of the total number of packets discarded for all class
	instances in this service for any reason due to DiffServ treatment.
	These are overall per-interface per-direction counts.
Sent Packets	A count of the total number of packets forwarded for all class
	instances in this service after their defined DiffServ treatments
	were applied. In this case, forwarding means the traffic stream
	was passed to the next functional element in the data path, such as
	the switching or routing function or an outbound link transmis-
	sion element. These are overall per-interface per-direction counts.
Quality of Service (QoS) Commands		11-39

202-10088-01, March 2005