User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
9-20 Security Commands
202-10088-01, March 2005
Format radius server retransmit <retries>
Mode Global Config
no radius server retransmit
This command sets the maximum number of times a request packet is re-transmitted, when no
response is received from the RADIUS server, to the default value, i.e. 10.
Format no radius server retransmit
Mode Global Config
radius server timeout
This command sets the timeout value (in seconds) after which a request must be retransmitted to
the RADIUS server if no response is received. The timeout value is an integer in the range of 1 to
30.
Default 6
Format radius server timeout <seconds>
Mode Global Config
no radius server timeout
This command sets the timeout value (in seconds) after which a request must be retransmitted to
the RADIUS server if no response is received, to the default value, i.e. 6.
Format no radius server timeout
Mode Global Config
show radius
This command is used to display the various RADIUS configuration items for the switch as well as
the configured RADIUS servers. If the optional token 'servers' is not included, the following
RADIUS configuration items will be displayed.
Format show radius [servers]
Mode Privileged EXEC
Primary Server IP Address Indicates the configured server currently in use for authenti-
cation