User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
9-16 Security Commands
202-10088-01, March 2005
show dot1x users
This command displays 802.1x port security user information for locally configured users.
Format show dot1x users <slot/port>
Mode Privileged EXEC
User Users configured locally to have access to the specified port.
show users authentication
This command displays all user and all authentication login information. It also displays the
authentication login list assigned to the default user.
Format show users authentication
Mode Privileged EXEC
User This field lists every user that has an authentication login list assigned.
System Login This field displays the authentication login list assigned to the user for system
login.
802.1x Port Security This field displays the authentication login list assigned to the user for 802.1x
port security.
users defaultlogin
This command assigns the authentication login list to use for non-configured users when
attempting to log in to the system. This setting is overridden by the authentication login list
assigned to a specific user if the user is configured locally. If this value is not configured, users will
be authenticated using local authentication only.
Format users defaultlogin <listname>
Mode Global Config
users login
This command assigns the specified authentication login list to the specified user for system login.
The <user> must be a configured <user> and the <listname> must be a configured login list.
If the user is assigned a login list that requires remote authentication, all access to the interface
from all CLI, web, and telnet sessions will be blocked until the authentication is complete.