User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-129
202-10088-01, March 2005
MSTP BPDUs Transmitted Multiple Spanning Tree Protocol Bridge Protocol Data Units sent
MSTP BPDUs Received Multiple Spanning Tree Protocol Bridge Protocol Data Units received.
show spanning-tree mst detailed
This command displays settings and parameters for the specified multiple spanning tree instance.
The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree
instance ID. The following details are displayed.
Format show spanning-tree mst detailed <mstid>
Modes Privileged EXEC
User EXEC
MST Instance ID The ID of the MST being created.
MST Bridge Priority The bridge priority for the MST instance selected.
Time Since Topology Change The time in seconds since the topology changed.
Topology Change Count Number of times the topology has changed for this multiple spanning tree
instance.
Topology Change in Progress Value of the Topology Change parameter for the multiple spanning
tree instance.
Designated Root Identifier of the Regional Root for this multiple spanning tree instance.
Root Path Cost Path Cost to the Designated Root for this multiple spanning tree instance.
Root Port Identifier Port to access the Designated Root for this multiple spanning tree instance.
Associated FIDs List of forwarding database identifiers associated with this instance.
Associated VLANs List of VLAN IDs associated with this instance.
show spanning-tree mst port detailed
This command displays the detailed settings and parameters for a specific switch port within a
particular multiple spanning tree instance. The instance <mstid> is a number that corresponds to
the desired existing multiple spanning tree instance. The <slot/port> is the desired switch port.
Format show spanning-tree mst port detailed <mstid> <slot/
port>
Mode Privileged EXEC and User EXEC
MST Instance ID The ID of the MST instance.
Port Identifier The port identifier for the specified port within the spanning tree.