NETGEAR 7300S manual Logging history, Logging host, No logging console, No logging history

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Default	disabled; critical
Format	logging console [severitylevel]
Mode	Global Config
no logging console

This command disables logging to the console.

Format	no logging console
Mode	Global Config

logging history

This command enables logging of system startup and system operation logs to storage. The <severitylevel> value is specified as either an integer from 0 to 7 or symbolically through one of the following keywords: EMERGENCY (0), ALERT (1), CRITICAL (2), ERROR (3), WARNING (4), NOTICE (5), INFORMATIONAL (6), DEBUG (7).

Default	enabled; severitylevel - critical
Format	logging history [severitylevel]
Mode	Global Config
no logging history

This command disables logging. It does not clear the contents of the log.

Format	no logging history
Mode	Global Config

logging host

This command enables logging to a host where up to eight hosts can be configured. AddressType can be ipv4 or dns, port can be of a value from

Default	Port - 514; Level - Critical;
Format	logging host <ipaddress> <addresstype> [port <port>]
	[level <severitylevel>]
Mode	Global Config
8-68	Switching Commands

202-10088-01, March 2005