User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-99
202-10088-01, March 2005
Note: This command has an effect only when GVRP is enabled.
Format no set garp timer leaveall
Mode Interface Config
set garp timer leaveall all
This command sets how frequently Leave All PDUs are generated for all ports. A Leave All PDU
indicates that all registrations will be unregistered. Participants would need to rejoin in order to
maintain registration. The value applies per port and per GARP participation. The time may range
from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds.
Note: This command has an effect only when GVRP is enabled.
Default 1000
Format set garp timer leaveall all <200-6000>
Mode Global Config
no set garp timer leaveall all
This command sets how frequently Leave All PDUs are generated for all ports to 1000 centiseconds
(10 seconds). .
Note: This command has an effect only when GVRP is enabled.
Format no set garp timer leaveall all
Mode Global Config
show garp
This command displays Generic Attributes Registration Protocol (GARP) information.
Format show garp
Mode Privileged EXEC and User EXEC
GMRP Admin Mode This displays the administrative mode of GARP Multicast Registration Protocol
(GMRP) for the system.
GVRP Admin Mode This displays the administrative mode of GARP VLAN Registration Protocol
(GVRP) for the system