NETGEAR 7300S manual Show interfaces random-detect

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Interface	This displays the slot/port of the interface. If displaying the glo-
	bal configuration, this output line is replaced with a Global Con-
	fig indication.
Intf Shaping Rate	The maximum transmission bandwidth limit for the interface as a
	whole. It is independent of any per-queue maximum bandwidth
	value(s) in effect for the interface. This is a configured value.
Queue Mgmt Type	The queue depth management technique used for all queues on
	this interface, either tail drop or weighted random early discard
	(WRED). This is a configured value.
WRED Decay Exponent	The weighted random early discard (WRED) average queue
	length calculation decay exponent. This is a configured value.

The following information is repeated for each queue on the interface.

Queue IdQueue identification number An interface supports n queues numbered 0 to (n-1). The specific n value is platform dependent.

Minimum Bandwidth	The minimum transmission bandwidth guarantee for the queue,
	expressed as a percentage. A value of 0 means bandwidth is not
	guaranteed and the queue operates using best-effort. This is a
	configured value.
Maximum Bandwidth	The maximum transmission bandwidth limit for the queue,
	expressed as a percentage. A value of 0 means no upper limit is
	enforced, so the queue may use any or all of the available band-
	width of the interface. This is a configured value.
Scheduler Type	Indicates whether this queue is scheduled for transmission using a
	strict priority or a weighted scheme. This is a configured value.
Queue Mgmt Type	The queue depth management technique used for this queue,
	either tail drop or weighted random early discard (WRED). This
	is a configured value.

show interfaces random-detect

This command displays the weighted random early discard (WRED) configuration for each supported drop precedence level of each queue for the specified interface. The slot/port parameter is optional and is only valid on platforms that support independent per-port class of service mappings. If specified, the class-of-service WRED configuration of the interface is displayed. If omitted, the most recent global configuration settings are displayed.

Format	show interfaces random-detect [slot/port]
Mode	Privileged EXEC
Quality of Service (QoS) Commands		11-47

202-10088-01, March 2005