NETGEAR 7300S manual Show ip dhcp binding, Show ip dhcp global configuration, No option

	User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Format	option <code> {ascii string hex <string1>
	[<string2>...<string8> ] ip <address1>
	[<address2>...<address8> ]}
Mode	DHCP Pool Config

no option

This command removes the options.

Format	no option	<code>
Mode	DHCP Pool	Config

show ip dhcp binding

This command displays address bindings for the specific IP address on the DHCP server. If no IP address is specified, the bindings corresponding to all the addresses are displayed.

Format	show ip dhcp binding [address]
Modes	Privileged EXEC
	User EXEC
IP address	The IP address of the client.
Hardware Address	The MAC Address or the client identifier.
Lease expiration	The lease expiration time of the IP Address assigned to the client.
Type	The manner in which IP Address was assigned to the client.

show ip dhcp global configuration

This command displays address bindings for the specific IP address on the DHCP server. If no IP address is specified, the bindings corresponding to all the addresses are displayed.

Format	show ip dhcp global configuration
Modes	Privileged EXEC
	User EXEC
Service DHCP	The field to display the status of dhcp protocol.
Number of Ping Packets	The maximum number of Ping Packets that will be sent to verify
	that an ip address id not already assigned.
Switching Commands	8-91

202-10088-01, March 2005