User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software IS CLI Mapping A-31
202-10088-01, March 2005
Global
Config snmp trap link- status all
Global
Config no snmp trap link- status all
Switching config port physicalmode <slot/port
| all> <100h | 100f | 10h | 10f> Interface
Config speed {{100 | 10} {half-duplex |
full-duplex} | 1000 full-duplex}
Global
Config speed all {{100 | 10} {half-duplex |
full-duplex} | 1000 full-duplex}
Switching config port lacpmode <slot/port/all>
<enable/disable> Interface
Config port lacpmode
Interface
Config no port lacpmode
Global
Config port lacpmode all
Global
Config no port lacpmode all
Switching config port autoneg <slot/port/all>
<enable/disable> Interface
Config auto-negotiate
Interface
Config no auto-negotiate
Global
Config auto-negotiate all
Global
Config no auto-negotiate all
Switching config lag create <name> Global
Config port-channel <name>
Switching config lag addport <logical slot/
port> <slot/port> Interface
Config addport <logical slot/port>
Switching config lag deleteport <logical slot/
port> <slot/port | all> Interface
Config deleteport <logical slot/port>
Table 12-3. IS CLI Mapping (continued)
Package 7300S Series L3 Switch
Command
CLI Command
Mode Syntax