User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Format

dot1x timeout {{reauth-period <seconds>} {quiet-

 

period <seconds>} {tx-period <seconds>} {supp-tim-

 

eout <seconds>} {server-timeout <seconds>}}

Mode

Interface Config

no dot1x timeout

 

This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to the default values. Depending on the token used, the corresponding default values are set.

Format

no dot1x

timeout {reauth-period quiet-period tx-

Mode

period

supp-timeout server-timeout}

Interface Config

dot1x user

This command adds the specified user to the list of users with access to the specified port or all ports. The <user> parameter must be a configured user.

Format

dot1x user <user> {<slot/port> all}

Mode

Global Config

no dot1x user

 

This command removes the user from the list of users with access to the specified port or all ports.

Format

no dot1x user

<user> {<slot/port> all}

Mode

Global Config

 

show radius accounting

This command is used to display the configured RADIUS accounting mode, accounting server and the statistics for the configured accounting server.

Format

show radius accounting [statistics <ipaddr>]

Mode

Privileged EXEC

If the optional token 'statistics <ipaddr>' is not included, then only the accounting mode and the RADIUS accounting server details are displayed.

Mode

Enabled or disabled

 

 

Security Commands

9-11

202-10088-01, March 2005

Page 219
Image 219
NETGEAR 7300S manual Dot1x user, Show radius accounting, No dot1x timeout, No dot1x user