User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Quality of Service (QoS) Commands 11-37
202-10088-01, March 2005
Policy Details Attached policy details, whose content is identical to that
described for the show policy-map <policymapname> command
(content not repeated here for brevity).
show diffserv service brief
This command displays all interfaces in the system to which a DiffServ policy has been attached.
The direction parameter is optional; if specified, only services in the indicated direction are shown,
otherwise service information is shown for both directions, where applicable.
Format show diffserv service brief [in | out]
Mode Privileged EXEC
DiffServ Mode The current setting of the DiffServ administrative mode. An
attached policy is only active on an interface while DiffServ is in
an enabled mode.
The following information is repeated for interface and direction (only those
interfaces configured with an attached policy are shown):
Interface Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service, either in or out
OperStatus The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated
direction.
show policy-map interface
This command displays policy-oriented statistics information for the specified interface and
direction. The <slot/port> parameter specifies a valid interface for the system. The direction
parameter indicates the interface direction of interest.
Note: This command is only allowed while the DiffServ administrative mode is enabled.
Format show policy-map interface <slot/port> <in | out>
Interface Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service, either in or out.
Operational Status The current operational status of this DiffServ service interface.