User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-110 Switching Commands
202-10088-01, March 2005
Mode Vlan Mode
no set igmp
This command disables IGMP snooping on a particular VLAN, and in turn disabling IGMP
snooping on all interfaces participating in this VLAN.
Format no set igmp <vlanId>
Mode Vlan Mode
set igmp groupmembershipinterval
This command sets the IGMP Group Membership Interval on a particular VLAN. The Group
Membership Interval time is the amount of time in seconds that a switch will wait for a report from
a particular group on a particular interface, which is participating in the VLAN, before deleting the
interface from the entry. This value must be greater than IGMP Maximum Response time value.
The range is 2 to 3600 seconds.
Default 260 seconds
Format set igmp groupmembershipinterval <vlanId> <2-3600>
Mode Vlan Mode
no set igmp groupmembershipinterval
This command sets the IGMP Group Membership Interval time on a particular VLAN to the
default value.
Format no set igmp groupmembershipinterval <vlanId>
Mode Vlan Mode
set igmp maxresponse
This command sets the IGMP Maximum Response time on a particular VLAN. The Maximum
Response time is the amount of time in seconds that a switch will wait after sending a query on an
interface, which is participating in the VLAN, because it did not receive a report for a particular
group in that interface. This value must be less than the IGMP Query Interval time value. The
range is 1 to 3599 seconds.
Default 10 seconds