User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
9-24 Security Commands
202-10088-01, March 2005
ip http secure-port
This command is used to set the sslt port where port can be 1-65535 and the default is port 443.
Default 443
Format ip http secure-port <portid>
Mode Privileged EXEC
no ip http secure-port
This command is used to reset the sslt port to the default value.
Format no ip http secure-port
Mode Privileged EXEC
ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1,
SSL3 or to both TLS1 and SSL3.
Default SSL3 and TLS1
Format ip http secure-protocol [SSL3] [TLS1]
Mode Privileged EXEC
ip http secure-server
This command is used to enable the secure socket layer for secure HTTP.
Default disabled
Format ip http secure-server
Mode Privileged EXEC
no ip http secure-server
This command is used to disable the secure socket layer for secure HTTP.
Format ip http secure-server
Mode Privileged EXEC