NETGEAR 7300S manual Sntp client port, Sntp unicast client poll-interval, Sntp client mode

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

sntp client mode

This command will disable Simple Network Time Protocol (SNTP) client mode.

Format	no sntp client mode
Mode	Global Config

sntp client port

This command will set the SNTP client port id to a value from 1-65535.

Default	123
Format	sntp client port <portid>
Mode	Global Config
no sntp client port

This command will reset the SNTP client port back to its default value.

Format	no sntp client port
Mode	Global Config

sntp unicast client poll-interval

This command will set the poll interval for SNTP unicast clients in seconds as a power of two where <poll-interval> can be a value from 6 to 16.

Default	6
Format	sntp unicast client poll-interval <poll-interval>
Mode	Global Config

no sntp unicast client poll-interval

This command will reset the poll interval for SNTP unicast clients to its default value.

Format	no sntp unicast client poll-interval
Mode	Global Config

Switching Commands 8-73

202-10088-01, March 2005