NETGEAR 7300S manual Ip access-group all, Show ip access-lists

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

no access-list

This command deletes an ACL that is identified by the parameter <accesslistnumber> from the system.

Format	no access-list<accesslistnumber>
Mode	Global Config

ip access-group

This command attach a specified access-control list to an interface.

Default	none
Format	ip access-group<accesslistnumber> <in out>
Mode	Interface Config

ip access-group all

This command attach a specified access-control list to all interfaces.

Default	none
Format	ip access-group all <accesslistnumber> <in out>
Mode	Global Config

show ip access-lists

This command displays an Access Control List (ACL) and all of the rules that are defined for the ACL. The <accesslistnumber> is the number used to identify the ACL.

Format	show ip access-lists <accesslistnumber>
Mode	Privileged EXEC and User EXEC
Rule Number	This displays the number identifier for each rule that is defined
	for the ACL.
Action	This displays the action associated with each rule. The possible
	values are Permit or Deny.
Protocol	This displays the protocol to filter for this rule.
Source IP Address	This displays the source IP address for this rule.
11-6	Quality of Service (QoS) Commands

202-10088-01, March 2005