NETGEAR 7300S manual Show ip route bestroutes, Show ip route entry, Protocol, Next Hop Intf

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Subnet Mask	Is a mask of the network and host portion of the IP address for the
	router interface.
Protocol	Tells which protocol added the specified route. The possibilities
	are: local, static, or RIP.
Total Number of Routes The total number of routes.
For each Next Hop
Next Hop Intf	The outgoing router interface to use when forwarding traffic to
	the next destination.
Next Hop IP Address	The outgoing router IP address to use when forwarding traffic to
	the next router (if any) in the path toward the destination.

show ip route bestroutes

This command causes the entire route table to be displayed. This commands takes no options.

Format	show ip route bestroutes
Mode	Privileged EXEC
Network Address	Is an IP route prefix for the destination.
Subnet Mask	Is a mask of the network and host portion of the IP address for the
	specified interface.
Protocol	Tells which protocol added the specified route. The possibilities
	are: local, static, or RIP.

Total Number of Routes The total number of routes in the route table.

For each Next Hop
Next Hop Intf	The outgoing router interface to use when forwarding traffic to
	the next destination.
Next Hop IP Address	The outgoing router IP address to use when forwarding traffic to
	the next router (if any) in the path toward the destination. The
	next router will always be one of the adjacent neighbors or the IP
	address of the local interface for a directly attached network.

show ip route entry

This command displays the entire route table.

Format	show ip route entry
Routing Commands	10-13

202-10088-01, March 2005