NETGEAR 7300S Show ip route preferences, Show ip stats, Next Hop Interface, Preference, Local

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Mode	Privileged EXEC
Network Address	Is a valid network address identifying the network on the speci-
	fied interface.
Subnet Mask	Is a mask of the network and host portion of the IP address for the
	attached network.
Protocol	Tells which protocol added the specified route. The possibilities
	are: local, static, or RIP.
For each Next Hop
Next Hop Interface	The outgoing router interface to use when forwarding traffic to
	the next destination.
Next Hop IP Address	The outgoing router IP address to use when forwarding traffic to
	the next router (if any) in the path toward the destination.
Preference	The metric value that is used for this route entry.
Metric

show ip route preferences

This command displays detailed information about the route preferences. Route preferences are used in determining the best route. Lower router preference values are preferred over higher router preference values.

Format	show ip route preferences
Mode	Privileged EXEC and User EXEC
Local	This field displays the local route preference value.
Static	This field displays the static route preference value.
RIP	This field displays the RIP route preference value.

show ip stats

This command displays IP statistical information. Refer to RFC 1213 for more information about the fields that are displayed. This command takes no options.

Format	show ip stats
Mode	Privileged EXEC and User EXEC

10-14 Routing Commands

202-10088-01, March 2005