User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-41
202-10088-01, March 2005
Format monitor session source <slot/port> <destination>
<slot/port>
Mode Global Config
no monitor session
This command removes the monitor session (port monitoring) designation from both the source
probe port and the destination monitored port and removes the probe port from all VLANs. The
port must be manually re-added to any desired VLANs.
Format no monitor session
Mode Global Config
monitor session mode
This command configures the monitor session (port monitoring) mode to enable. The probe and
monitored ports must be configured before monitor session (port monitoring) can be enabled. If
enabled, the probe port will monitor all traffic received and transmitted on the physical monitored
port. It is not necessary to disable port monitoring before modifying the probe and monitored
ports.
Default disabled
Format monitor session mode
Mode Global Config
no monitor session mode
This command sets the monitor session (port monitoring) mode to disable.
Format no monitor session mode
Mode Global Config
shutdown
This command disables a port.
Default enabled
Format shutdown
Mode Interface Config