NETGEAR 7300S manual Class-map rename, Match ethertype, Match secondary-cos, Match secondary-vlan

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

class-map rename

This command changes the name of a DiffServ class. The <classname> is the name of an existing DiffServ class. The <newclassname> parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the class (Note: the class name ‘default’ is reserved and must not be used here).

Default	none
Format	class-map rename <classname> <newclassname>
Mode	Global Config
match ethertype

This command adds to the specified class definition a match condition based on the value of the ethertype. The <ethertype> value is specified as one of the following keywords: appletalk, arp,

ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios, novell, pppoe, rarp or as a custom ethertype value in the

range of 0x0600-0xFFFF.

Format	match [not] ethertype {<keyword> custom <0x0600-
	0xFFFF>}
Mode	Class-Map Config
match secondary-cos

This command adds to the specified class definition a match condition for the secondary Class of Service value (the inner 802.1Q tag of a double VLAN tagged packet). The value may be from 0 to 7.

Format	match [not] secondary-cos <0-7>
Mode	Class-Map Config
match secondary-vlan

This command adds to the specified class definition a match condition for the secondary VLAN identifier value (the inner 802.1Q tag of a double VLAN tagged packet). The range from vlanmin and vlanmax are integers from 1 to 4094 with vlanmax being optional.

Format	match [not] secondary-vlan <vlanmin> [<vlanmax>]
Mode	Class-Map Config

Quality of Service (QoS) Commands 11-11

202-10088-01, March 2005