NETGEAR 7300S manual Internet Group Management Protocol Igmp Commands, Set igmp

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Mode	Privileged EXEC
Mac Address	A unicast MAC address for which the switch has forwarding and or filtering
	information. The format is 6 or 8 two-digit hexadecimal numbers that are sepa-
	rated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC
	address will be displayed as 8 bytes.
Type	This displays the type of the entry. Static entries are those that are configured by
	the end user. Dynamic entries are added to the table as a result of a learning pro-
	cess or protocol.
Description	The text description of this multicast table entry.
Interfaces	The list of interfaces that are designated for forwarding (Fwd:) and filtering
	(Flt:).

Internet Group Management Protocol (IGMP) Commands

This chapter provides a detailed explanation of the IGMP commands. The commands are divided into two functional groups:

•Show commands display switch settings, statistics, and other information.

•Configuration commands configure features and options of the switch. For every configuration command, there is a show command that displays the configuration setting.

set igmp

This command enables IGMP Snooping on the system. The default value is disable.

Note: The IGMP application supports the following:

•Global configuration or per interface configuration. Per VLAN configuration is unsupported in the IGMP snooping application.

•Validation of the IP header checksum (as well as the IGMP header checksum) and discarding of the frame upon checksum error.

•Maintenance of the forwarding table entries based on the MAC address versus the IP address.

•Flooding of unregistered multicast data packets to all ports in the VLAN.

Format	set igmp
Mode	Global Config
Switching Commands	8-105

202-10088-01, March 2005