User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-80 Switching Commands
202-10088-01, March 2005
users snmpv3 accessmode
This command specifies the snmpv3 access privileges for the specified login user. The valid
accessmode values are readonly or readwrite. The <username> is the login user name for which
the specified access mode applies. The default is readwrite for ‘admin’ user; readonly for all
other users
Default admin -- readwrite; other -- readonly
Format users snmpv3 accessmode <username> <readonly | read-
write>
Mode Global Config
no users snmpv3 accessmode
This command sets the snmpv3 access privileges for the specified login user as readwrite for the
‘admin’ user; readonly for all other users. The <username> is the login user name for which the
specified access mode will apply.
Format no users snmpv3 accessmode <username>
Mode Global Config
users snmpv3 authentication
This command specifies the authentication protocol to be used for the specified login user. The valid authentication
protocols are none, md5 or sha. If md5 or sha are specified, the user login password is also used as the
snmpv3 authentication password and therefore must be at least eight characters in length. The
<username> is the login user name associated with the authentication protocol.
Default no authentication
Format users snmpv3 authentication <username> <none | md5 |
sha>
Mode Global Config
no users snmpv3 authentication
This command sets the authentication protocol to be used for the specified login user to none. The
<username> is the login user name for which the specified authentication protocol will be used.
Format users snmpv3 authentication <username>
Mode Global Config