User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-117
202-10088-01, March 2005
Active Ports This field lists the ports that are actively participating in this port-
channel.
show port-channel This command displays an overview of all port-channels (LAGs) on the switch.
Format show port-channel {<logical slot/port> | all}
Mode Privileged EXEC
Logical slot/port Valid slot and port number separated by forward slashes.
Name The name of this port-channel (LAG). You may enter any string
of up to 15 alphanumeric characters.
Link State Indicates whether the Link is up or down.
Admin Mode May be enabled or disabled. The factory default is enabled.
Link Trap Mode This object determines whether or not to send a trap when link
status changes. The factory default is enabled.
STP Mode The Spanning Tree Protocol Administrative Mode associated
with the port or port-channel (LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port.
Mbr Ports A listing of the ports that are members of this port-channel
(LAG), in slot/port notation. There can be a maximum of eight
ports assigned to a given port-channel (LAG).
Port Speed Speed of the port-channel port.
Type This field displays the status designating whether a particular
port-channel (LAG) is statically or dynamically maintained. The
possible values of this field are Static, indicating that the port-
channel is statically maintained; and Dynamic, indicating that the
port-channel is dynamically maintained.
Active Ports This field lists the ports that are actively participating in the port-channel
(LAG).